----
Industrial Parts Washers ---------------------------------------
[ Home ] [ Standard Tanks, Generators and Immersibles ] [ Precision Cleaning Equipment ] [ Industrial Parts Washers ] [ Vapor State Degreasers ] [ Recirculating Hot Air Dryers ] [ Customized Systems ][ About Ultra Clean ] [ Products ] [ Custom Fabrication ] [ Contact UCE ]
Basic Operation
Parts to be cleaned are placed into
baskets, which are locked into place on a lift. Dual start buttons
designed for operator safety initiate the cycle. The basket is lowered
into the process tank as the chamber cover automatically closes. The
temperature controlled cleaning solution is continuously filtered to remove
particles and contaminants and then pumped into the tank. A full range of
controls permits safe, flexible cleaning at high cleanliness levels. When
the cycle is completed, the lift returns to the raised position for unloading.
TRIAD System Advantages
-
Designed
with a compact footprint for floorspace efficiency
-
Reduces
chemistry and lowers waste disposal costs
-
User
friendly and dependable design in a rugged, easily maintained 304 stainless
steel cabinet with 14-gauge 316-L stainless steel tank construction
-
Process
tank liquid gravity feeds back to the holding tank if cleaning is
interrupted or power fails
-
Major
plumbing components are installed over reservoir tank to contain any
potential leaks
-
Pumps,
filters and valves are readily accessible for maintenance
-
Equipped
with a PLC to control temperature, timing of cleaning, rinsing and drying
cycles, and to store multiple process recipes
-
Designed
with multiple safety features to ensure operator protection
-
Fresh
water spray rinsing
-
Automatic
water make-up
|
Process Control Capabilities
The PLC is capable of storing
and recalling multiple recipes including the following functions:
-
Number
of wash and rinse cycles
-
Rinse
time
-
Drying
on/off and timing
-
Minimum
and maximum solution temperatures
-
Temperature
ramping
-
Alarm
limits
-
Basket
rotation on/off and speeds
The
system also monitors and displays parameters on a front panel status light
indicator. Parameters include:
-
Solution
temperature
-
Alarm
status
-
Ultrasonic
on/off
-
Cycle
status
-
Tank
discharge
|
|
|
Safety Features
-
Over
temperature system shutdown
-
Low
liquid level system shutdown
-
Moving
parts enclosed for operator safety
-
Chamber
cover must be closed for system to start
-
Operator
must use both hands to initiate cycle
-
Enclosed
cleaning chamber reducing operator exposure to chemicals and
minimizing noise levels
|
Options
|
Ultra
Clean Equipment, Inc. · 112 Nod Road, #9 · Clinton, CT 06413 · (860) 669-1354
· fax (860) 669-4935